Throttle Position Sensor Adjustment Toyota
Throttle Position Sensor Adjustment Toyota. This will cause the idle timing to advance more than 30 degrees which will cause very high hc and nox emissions. The only 3 things left that seem to possibly be at fault are the tps or the adjustment of it, the accelerator pedal position sensor (looks kind of dusty but i don’t know if that affects it) or the adjustment of that, or a faulty throttle body itself.
This will cause the idle timing to advance more than 30 degrees which will cause very high hc and nox emissions. First set the tps at about the half way point. Apply vacuum to the throttle opener.
Push Gas Pedal Slowly And Steadily To The Floor 3X.
The sensor basically looks at idle or closed throttle (idl) and throttle angle opening (vta). The throttle position sensor can get out of adjustment due to wear in the throttle body or due to carbon build up. This will cause the idle timing to advance more than 30 degrees which will cause very high hc and nox emissions.
This Will Cause The Idle Timing To Advance More Than 30 Degrees Which Will Cause Very High Hc And Nox Emissions.
In this video i will explain how a (tps) throttle position sensor works, how. You can use alligator clips to make this easier or use small ¼ lengths of vacuum hose to hold them on Conversely, the throttle position sensors can wear out and not properly advance the timing which causes a lack of.
My Assumption Is That The Adjustment Is There Just To Deal With Manufacturing Tolerances.
So, armed with your service manual and proper tools, adjusting the throttle position sensor should lead to a better running, more efficient engine. The throttle position test outlined in this tutorial will help you to accurately diagnose the tps as bad (or not). Loosen both screws attaching tps to throttle body.
Use Good Alligator Clips To Make Hands Free Measurement.
Conversely, the throttle position sensors can wear out and not properly advance the timing which causes a lack of power. Now you can smile as you start it and drive away. Step #2, put the new one in the old ones place.
Remove The Sensor Electrical Connector.
The ear is slotted on 1 side for adjustment. Remove the electrical connector by pushing down on the tab. If it has failed, you may notice symptoms such as no acceleration or poor acceleration in addition to a check engine light.
Post a Comment for "Throttle Position Sensor Adjustment Toyota"