Skip to content Skip to sidebar Skip to footer

Cartell Driveway Sensor Troubleshooting

Cartell Driveway Sensor Troubleshooting. A direct burial cable is attached at the factory. We have a customer who has a cartell driveway sensor installed at their house.

Smart Driveway Alert System with Easy Integration Cartell
Smart Driveway Alert System with Easy Integration Cartell from cartell.com

We have a customer who has a cartell driveway sensor installed at their house. Sensor can be installed in the driveway, beside the driveway, or on a post adjacent to the drive. It is weatherproof and allows for easy solder and weatherproof connection of cable.

Open Gates Automatically When Exiting Your Property Without The Use Of Keypads, Remotes Or Key Fobs, And Without Having To Manually Let Visitors Out.


To resolve this, bring your sensor closer to your house, or wherever your receiver is located. 1.move the sensor closer to the integrator, and/or 2.install a repeater in the home between the sensor puck and integrator connected to the security/home automation system. Preferred technologies group manufacturer website address:

On The Side With Not Much Room, I Was Very Limited In Where The Puck Could Go.


The cable can be spliced in the field. Intrusion & smart home manufacturer: Physical interference between your sensor and receiver.

Use With All Wired Driveway Alarm Systems And Pioneer Free Exit System


The attached cable comes in increments of 100 ft., from 100 ft. If the signal from sensor puck is not reaching the integrator: If the signal from sensor puck is not reaching the integrator:

Move The Sensor Closer To The Integrator, And/Or 2.


Our systems are only activated by moving steel. In order to create a driveway alarm system, you need to purchase more components. The sensor for our wired systems installs in the grass beside the drive without the need to disturb your driveway.

This Is For Those Who Prefer To Install Cable First And Sensor Probe Later.


Sensor can be installed in the driveway, beside the driveway, or on a post adjacent to the drive. Attached to the circuit board relay is a sticker with a set of numbers and letters. It is weatherproof and allows for easy solder and weatherproof connection of cable.

Post a Comment for "Cartell Driveway Sensor Troubleshooting"