Hydrawise Rain Sensor Stopping Irrigation

Hydrawise Rain Sensor Stopping Irrigation. Hydrawise also supports flow monitoring when used with a hunter hc flow meter. Hydrawise supports standard open/closed contact rain sensors and soil moisture sensors.

Hunter Hydrawise 6 Zone ProHC WiFi Irrigation Outdoor from valvesdirect.net

Once the manual all stations is initiated, go to the sensor and hold down the quick response spindle button and the water will shut down. The software supports standard open/closed contact sensors, such as rain, soil moisture, and other on/off sensors. For full details, refer to the instructions provided with your sensor, or flow meter.

Source: valvesdirect.net

We also let you compare the proposed irrigation schedule to the actual schedule (what actually happened) and log all manual starts. Click the reports icon ( ) at the bottom or click reports if using your computer (pc) from the home dashboard.

Source: valvesdirect.net

For more information on configuring sensors, check our guide here [1]. If your controller is showing a message indicating that the sensor is active even thought it has not rained or if the sensor is not shutting down the irrigation when it rains, this video will teach you how to test and troubleshoot your rain sensor.

Source: valvesdirect.net

These sensors use two wires and are usually labeled as normally open (sometimes called no) or normally closed (sometimes called nc). (if you know that your rainfall has exceeded your rain sensor activation setting, you may want to consider moving the.

Source: valvesdirect.net

Hydrawise supports standard open/closed contact rain sensors and soil moisture sensors. With hydrawise, both you and your contractor instantly receive flow and electrical system monitoring alerts.

Source: valvesdirect.net

This could be several hours or days. Login into your hydrawise account.

Source: valvesdirect.net

Hunter rain sensors stop scheduled irrigation when they detect that a preset level of rain has fallen. Normally closed (default setup) all hunter clik sensors.

In The Selected Zones Section, Select The Zones That You Would Like To Continue Watering If The Sensor Is Activated.

If your controller is showing a message indicating that the sensor is active even thought it has not rained or if the sensor is not shutting down the irrigation when it rains, this video will teach you how to test and troubleshoot your rain sensor. If your controller is showing a message indicating that the sensor is active even thought it has not rained or if the sensor is not shutting down the irrigat. Skip this step on a pc.

Login Into Your Hydrawise Account.

Adding a professional contractor takes the guesswork out of managing your irrigation system. Hydrawise supports a range of sensors that provide direct communication to the controller via the sensor ports. Start a zone if the zone should start, choose the minimum number of seconds before the sensor can cause the same zone to start again.

Hydrawise Gives You Exactly The Information You Need To Make The Best Choices Related To Irrigation Management.

This will allow a sensor to cause a zone to start or stop. Rain sensor setup hydrawise supports standard open/closed contact rain sensors and soil moisture sensors. Go out to the rain sensor and manually activate the switch.

Scroll Down And Select Next.

Do you hear it click? Hydrawise supports standard open/closed contact rain sensors and soil moisture sensors. Hydrawise also supports flow monitoring when used with a hunter hc flow meter.

That Way, You're Notified Immediately In The Event Of A Problem, And You Can Rest Assured That Your Outdoor Living Space Remains Protected.

Normally closed (default setup) all hunter clik sensors. A good example would be a simple switch where closed would represent on position and open would mean the off position. Click the icon in the upper left.