Skip to content Skip to sidebar Skip to footer

Pico First Look Sensor

Pico First Look Sensor. Connect the first look sensor to channel a on the picoscope using the 25ft bnc to bnc cable (included with firstlook) then attach the firstlook sensor to the exhaust pipe. Com/products/press… nicholson’s version of the pulse sensor is mentioned here:

FirstLook Engine Diagnostic Sensor Kit for Pressure Pulse
FirstLook Engine Diagnostic Sensor Kit for Pressure Pulse from www.priggen.com

Cena pre tento produkt nieje dostupnĆ”. Na objednĆ”vku, termĆ­n doručenia bude upresnenĆ½. The first test to do would be to stick the sensor hose into the exhaust of and 4 cylinder engine and crank the engine no start and collect a wave and save it in a folder.

Using First Look Was Created By Ian.broadbent.


The firstlook sensor is particularly suitable for use with a pico automotive oscilloscope, but can also be used with most other modern lab scopes. Senzor first look snĆ­ma zmenu tlaku ktorĆŗ vytvĆ”ra motor pri svojej činnosti. Ive just started using my first look sensor coupled to pico 3223.

The Firstlook Sensor Looks At The Pulse Waves Generated By The Normal Operation Of An Internal Combustion Engine.


This table shows the tests you may run with your firstlook® sensor system and the purposes of each test. One firstlook sensor is placed in the exhaust pipe to observe valve condition and for comparing compression across the cylinders. Pico firstlook™ diagnostickĆ½ senzor pre automobily.

The Firstlook Sensor Requires No External Power Source And Is Particularly Suitable For Use With A Picoscope Automotive Oscilloscope But Can Also Be Used With Most Other Modern Lab Scopes.


The firstlook diagnostic sensor is unique because it looks at pulses in engine airflow, allowing you to display “the pulse of your engine” on standard scope equipment. Attaching the wps500x or first look sensor to the fuel pressure regulator is another opportunity not to miss, and one that presents a far less intrusive insight into fuel return line activity. Thank you for your enquiry.

The First Test To Do Would Be To Stick The Sensor Hose Into The Exhaust Of And 4 Cylinder Engine And Crank The Engine No Start And Collect A Wave And Save It In A Folder.


The firstlook® sensor measures these puffs of air, or air pulses, and displays the ‘pulse signature’ on your lab scope. Oscilloscopes, spectrum analyzers, test and measurement, control products, dataloggers and usb serial converters Be the first to rate this product.

Com/Products/Press… Nicholson’s Version Of The Pulse Sensor Is Mentioned Here:


Cena pre tento produkt nieje dostupnĆ”. Can anybody see anything unusual,the car as varying power. How does it work ?

Post a Comment for "Pico First Look Sensor"