Hydrawise Override Rain Sensor
Hydrawise Override Rain Sensor. Attach the two yellow wires to. The bypass status light will turn red when the sensor is bypassed.
The system looks at the forecast and past history to ensure that. Go out to the rain sensor and manually activate the switch. Rain sensor customised to use with hydrawise controller;
This Allows You To Easily Override The Sensor By Using The Sensor Switch On The Front Panel.
Skip this step on a pc. 5 level adjustable rain setting ( inch & mm) no battery needed; This panel will show you the amount of rain that fell yesterday and during the past week.
Click On The Icon Under The Active Sensor.
Sensors sensors will automatically cancel irrigation 30 days in advance but will revert to the normal state (not stopping irrigation) when the sensor switches back. This will move them up to the available zones section. From the home screen, click the remote icon at the bottom of the app.
When The Probe Senses That The Soil Has Reached Its Desired Moisture Level, It Will Shut Down Irrigation, Preventing Water Waste.
A sensor to start irrigation if motion is detected. While today's controllers are equipp. This allows you to easily override the sensor by using the sensor switch on the front panel.
To Bypass The Sensor, Press The Sensor Bypass Button On The Receiver.
This could be several hours or days. First, open your alerts tab. We added a new alert so you can see if your rain sensor has changed from wet to dry or dry to wet.
Shuts Down Watering Once Rain Is Detected;
The system looks at the forecast and past history to ensure that. In the selected zones section, select the zones that you would like to continue watering if the sensor is activated. The bypass status light will turn red when the sensor is bypassed.
Post a Comment for "Hydrawise Override Rain Sensor"